/usr/libexec/ipsec/charon was killed by signal 11 (SIGSEGV)https://wiki.strongswan.org/issues/163https://wiki.strongswan.org/issues/2798https://wiki.strongswan.org/projects/strongswan/wiki/KernelModules最终发现是kmod-iptunnel4没有安装,安装后即可启动tunnel parse
在 网络-交换机 下面设置如果要启用vlan,则CPU一列全部都需要选择tagged(关联)首先新建一个vlan,ID自己定,然后选择端口要不要打上vlan的标签如果端口下面接其他网络设备,需要使用trunk模式的话,就选择tagged(关联)如果端口下面接其他设备或者是不是用trunk模式连接其他网络设备(不使用trunk模式),就选择untagged(不关联)如果端口不属于该VLAN,则选择off(关)这是一个例子交换机0vlan id
在OpenWRT基础上升级X-WRT很简单:Installation: SSH to your router, or telnet if you've not set a password yet. Add the X-Wrt package repository with this command:echo "src X-Wrt http://download2.berlios.de/pub/xwrt/packages" >>
http://www.jacco2.dds.nl/networking/openswan-l2tp.html 1.1 IntroductionThis webpage contains information on how to use L2TP/IPsec clients from Microsoft, Apple and other vendors in a 'Road Warrior' setup connecting to a Linux VPN server based
https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/ipsec-troubleshooting.htmlRenegotiation ErrorsIf a tunnel comes up initially, but then fails after a Phase 1 or Phase 2 expiration, try changing the following settings on both ends of the tunnel:Sy
arsed QUICK_MODE response 1206673144 [ HASH SA No KE ID ID ]
received netlink error: No such file or directory (2)
unable to add SAD entry with SPI cf94fd61
received netlink error: No such file or directory (2)
unable to add SAD entry with SPI 93