CentOS7重启网络服务报错：the control process exited with error code

mportant;">

转载▼

标签：

centos重启网络报错

分类： Linux

刚上架一台服务器，配置好网络，重启网络服务器报错。

[root@localhost network-scripts]# service network restart

Restarting network (via systemctl): Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. [失败]

[root@localhost network-scripts]# systemctl status network.service

● network.service - LSB: Bring up/down networking

Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled)

Active: failed (Result: exit-code) since 三 2017-07-05 08:09:37 CST; 1min 15s ago

Docs: man:systemd-sysv-generator(8)

Process: 7132 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)

Process: 8159 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)

7月 05 08:09:37 localhost.localdomain network[8159]: RTNETLINK answers: File exists

7月 05 08:09:37 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1

7月 05 08:09:37 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.

7月 05 08:09:37 localhost.localdomain systemd[1]: Unit network.service entered failed state.

7月 05 08:09:37 localhost.localdomain systemd[1]: network.service failed.

[root@localhost network-scripts]# cat /var/log/messages | grep network

Jul 5 08:09:35 localhost systemd: Starting LSB: Bring up/down networking...

Jul 5 08:09:35 localhost network: 正在打开环回接口： [ 确定 ]

Jul 5 08:09:35 localhost network: 正在打开接口 enp1s0f0： RTNETLINK answers: File exists

Jul 5 08:09:37 localhost network: [ 确定 ]

Jul 5 08:09:37 localhost network: 正在打开接口有线连接_1：错误：激活连接失败：No suitable device found for this connection.

Jul 5 08:09:37 localhost network: [失败]

Jul 5 08:09:37 localhost network: RTNETLINK answers: File exists

Jul 5 08:09:37 localhost systemd: network.service: control process exited, code=exited status=1

Jul 5 08:09:37 localhost systemd: Failed to start LSB: Bring up/down networking.

Jul 5 08:09:37 localhost systemd: Unit network.service entered failed state.

Jul 5 08:09:37 localhost systemd: network.service failed.

[root@localhost network-scripts]#

关键点：

为什么是打开有线连接_1 接口而不是 enp1s0f0 ,不管怎样我们配置的是enp1s0f0，所以我们希望他打开enp1s0f0，所以我尝试将有线连接_1 配置注释。

[root@localhost network-scripts]/etc/sysconfig/network-scripts

[root@localhost network-scripts]/mv ifcfg-有线连接_1 backup-ifcfg-有线连接_1

再次重启网络服务就成功了。

[root@localhost network-scripts]# service network restart

Restarting network (via systemctl): [ 确定 ]

————————————————-————————end——————————————————-—————————

我在百度的时候还发现一些其他的错误情况，都说要修改mac地址。

下面说说具体的处理步骤。首先查看网卡接口的MAC地址，然后写入配置文件。

[root@localhost network-scripts]# ip addr

1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: enp1s0f0: mtu 1500 qdisc mq state UP qlen 1000

link/ether 00:8c:fa:03:fe:24 brd ff:ff:ff:ff:ff:ff

inet 58.64.197.207/27 brd 58.64.197.223 scope global enp1s0f0

valid_lft forever preferred_lft forever

inet 59.188.138.183/27 brd 59.188.138.191 scope global enp1s0f0

valid_lft forever preferred_lft forever

inet6 fe80::28c:faff:fe03:fe24/64 scope link

valid_lft forever preferred_lft forever

3: enp1s0f1: mtu 1500 qdisc mq state DOWN qlen 1000

link/ether 00:8c:fa:03:fe:25 brd ff:ff:ff:ff:ff:ff

[root@localhost network-scripts]# vi ifcfg-enp1s0f0

添加一下,

HWADDR: 00:8c:fa:03:fe:24

//红色标注为enp1s0f0的MAC地址，修改为自己的即可。

还有一些其他的情况，比如虚拟机里边的CentOS7重启之后无法联网了，重启network发现报错。

百度了一圈，都是叫修改mac地址的说法，但是改了之后并没有什么用，最后谷歌解决了。

解决方式：禁用NetworkManager

1. systemctl stop NetworkManager

2. systemctl disable NetworkManager

然后重启网络服务，能正常联网了！

-----------------------

centos7 无法启动网络(service network restart)错误解决办法:

(以下方法均为网上COPY,同时感谢原博主分享)

systemctl status network.service 出现以下错误

“rtnetlink answers file exists” 的解决方法

第一种：和 NetworkManager 服务有冲突，这个好解决，直接关闭 NetworkManger 服务就好了， service

NetworkManager stop，并且禁止开机启动 chkconfig NetworkManager off 。之后重启就好了。(我使用第一种成功)

第二种：和配置文件的MAC地址不匹配，这个也好解决，直接修改 /etc/udev/rules.d/70-persistent-net.rules文件的MAC

地址和 /etc/sysconfig/network-scripts/ifcfg-eth0一样就好了。

(两种都不行的话可以试试这个)

ip addr flush dev enoXXXXX

(copy地址:http://www.2cto.com/os/201411/350848.html)

三种方法解决 Failed to start LSB: Bring up/down networking 问题

《—》

1、执行 service network restart 出现以下错误

Restarting network (via systemctl): Job for network.service failed. See 'systemctl status network.service'

and 'journalctl -xn' for details.

2、根据上面的提示，执行“systemctl status network.service”输出以下的类似信息：

[root@localhost ~]# systemctl status network.service

network.service - LSB: Bring up/down networking

Loaded: loaded (/etc/rc.d/init.d/network)

Active: failed (Result: exit-code) since三 2014-11-05 15:30:10 CST; 1min 5s ago

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11月 05 15:30:10 localhost.localdomain systemd[1]: network.service: control process exited, code=exited

status=1

11月 05 15:30:10 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.

11月 05 15:30:10 localhost.localdomain systemd[1]: Unit network.service entered failed state.

3、解决的办法（由于centos7中没有70-persistent-net.rules这个文件，复制出来的虚拟机(vmware）需要修改mac地址）

，就是修改mac地址。

4、如何查看centos7复制出来的虚拟机的mac地址，需要执行 “ip addr”，输出如下的类似信息：

[root@localhost ~]# ip addr

1: lo:

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eno16777736:

link/ether00:0f:19:10:12:f1 brd ff:ff:ff:ff:ff:ff

inet 192.168.38.135/24 brd 192.168.38.255 scope global dynamic eno16777736

valid_lft 1681sec preferred_lft 1681sec

inet6 fe80::20c:11aa:ae11:4fe4/64 scope link

valid_lft forever preferred_lft forever

注意上面加粗加红的字，这就是新的mac地址。

接下来就剩下修改ifcfg-XXX文件了，只修改HWADDR就可以了。接下来执行service network restart就正常了。

《二》

如果还是启动失败查看是否有如下错误信息

Nov 23 22:09:07 hdcoe02 network[597]: Bringing up loopback interface: Could not load file

'/etc/sysconfig/network-scripts/ifcfg-lo'

Nov 23 22:09:07 hdcoe02 network[597]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'

Nov 23 22:09:08 hdcoe02 network[597]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'

Nov 23 22:09:08 hdcoe02 network[597]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo' Nov 23

22:09:08 hdcoe02 network[597]: [ OK ]

Nov 23 22:09:08 hdcoe02 network[597]: Bringing up interface enp0s25: Error: Connection activation failed:

Connection 'enp0s25' is not available on the device enp0s25 at this time.

设定开机启动一个名为NetworkManager-wait-online服务，命令为：

systemctl enable NetworkManager-wait-online.service

《三》

我也是上面方法都测试完了一直不成功，最后发现时因为在VMware 虚拟机里面的系统右上角显示的连接都没有连接上，

虽然报错都一样，最后我在虚拟机设置里面将原来的网络适配器删掉，重新建了一个新的网络适配器，这次进去，显示连接

成功，再用上面的方法，问题解决。

(copy地址:http://blog.csdn.net/qq_21398167/article/details/46694179)